รายละเอียดเพิ่มเติม

Models:

No. 71090 KNX eTR 201 Sunblind, signal white RAL 9003
No. 71100 KNX eTR 202 Sunblind, signal white RAL 9003
No. 71092 KNX eTR 201 Sunblind, jet black RAL 9005
No. 71102 KNX eTR 202 Sunblind, jet black RAL 9005

 

Description:

• Heating controller/thermostat
• Glass surface with temperature display and +/- touch keys
• Pushbutton for sun protection (e.g. blind, roller shutter, awning)

The KNX eTR 201/202 Sunblind push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and solar protection. White LEDs are integrated in these areas and their behaviour can be adjusted.

A temperature sensor is integrated into KNX eTR 201/202 Sunblind. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).

The KNX eTR 201/202 Sunblind has a PI controller for heating and cooling. The setpoint temperature can be changed using the “+” and “-” touch buttons. Communication objects can be linked via AND and OR logic gates.

 

Functions:

• Operating zone for temperature control with 2 areas (warmer, cooler)
• LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
• Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
• Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
• PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
• 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit

Additional functions KNX eTR 201 Sunblind:

• 1 operating zone for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)

Additional functions KNX eTR 202 Sunblind:

• 2 operating zones for blinds, awnings, shutters or windows with 2 areas (up/down with short/long distinction)

Configuration is made using the KNX software ETS 5