Scan the QR code on the EV charger to get on web application.
Connect EV charger connector to the EV
Press charge now or set charging schedule
Show finish status with total energy on the screen
It is an electric car charger with a size of 22 kW 3Phase 32A and a size of 7.4 kW Single Phase 32A.
An identity verification system has been installed. To show charging rights via RFID/NFC, which can be used by both RFID Card and Smart Phone (Android).
Comes with an electrical leakage protection system, both AC/DC, and also installed a surge protection device (Surge Protection) to prevent damage. Both of the charger and the car while charging
Energy Meter to measure charging power to be used in calculating expenses as well.
Setting charging time in advance Can be done via Web application (only IoT models)
User charging history report Time to start charging time Energy used It also reports the amount of charging per month. of each user as well.
There is a push button to start charging with a light indicating the button's ready status. and stop working in an emergency via the Emergency Stop button under the machine.
Install communication equipment between the user and the machine. It communicates via Wi-Fi, Modbus RTU and Modbus TCP to be able to carry charging information. Go create an expense management system. Can be combined with building management.
Check your house electric meter whether it is 15(45) or 30(100).
If anyone is afraid that having EV charging at home will cause breaker tripping, and needs to decide whether to have EV charging or turn on the AC, and does not want to change the house electric meter to 30(100), we have solutions.
Solution 1: Use the EV charger that is IoT model. This model allows current adjusting so that the current will not exceed the breaker limit.
Solution 2: Install an Energy Management device to adjust the current automatically to not exceed the breaker threshold.
If anyone is afraid that having EV charging at home will cause breaker tripping, needs to decide whether to have EV charging or turn on the AC, and does not want to change the house electric meter to 30(100), we have solutions.
Solution 1: Use the IoT EV charger model. This model allows current adjusting so that the current will not exceed the breaker limit.
Solution 2: Install an Energy Management device to adjust the current automatically to not exceed the breaker threshold.
Yes. The charger is tested for IP65, which means it can be installed outdoors in sunlight and rain.
Bluestone EV charger, model 22kW IoT, is registered under PEA (Provincial Electricity Authority). Therefore, the charging fee is as cheap as 2.9162 Baht/unit. (Subjected to the conditions of those who are using the Low Priority system)
EV charger should be installed near parking spot as charging connector is usually 5 or 7 meters.
© 2021 Bluestone, All Rights Reserved
