Shop

KNX eTR 205/206 Light

Button for Temperature Control and Light

KNX heating controller with temperature sensor and light operation

 

Colours:

  • White
  • Black

Characteristics:

  • 1 control area
  • 2 control areas
Category:

Description

Models:

No. 71160 KNX eTR 205 Light, signal white RAL 9003
No. 71170 KNX eTR 206 Light, signal white RAL 9003

 

Description:

The KNX eTR 205/206 Light push button has touch-sensitive buttons with which functions can be called up in the KNX building bus system. The glass surface is printed with areas for setting the temperature and light. LEDs are integrated in these areas and their behaviour can be adjusted. A temperature sensor is integrated into KNX eTR 205/206 Light. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value). The KNX eTR 205/206 Light has a PI controller for heating and cooling. The setpoint temperature can be changed using the “+” and “-” touch buttons. Communication objects can be linked via AND and OR logic gates.

 

Functions:

  • Operating zone for temperature control with 2 areas (warmer, cooler)
  • LEDs can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs individually controllable
  • Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
  • Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
  • PI-controller for heating (one or two-level) and cooling (one or twolevel) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
  • 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit

Additional functions KNX eTR 205 Light:

  • 1 operating zone for light with 2 areas (switching/dimming with short/ long distinction)

Additional functions KNX eTR 206 Light:

  • 2 operating zones for light with 2 areas (switching/dimming with short/ long distinction)

Configuration is made using the KNX software ETS 5

Reviews

There are no reviews yet.

Post a comment

12345

Comment